Equipmake ShaftSense

Price On Application

The Equipmake Shaft Sensor System is a non contacting system which allows the relative positions of 2 or more points on a shaft, or 2 or more shafts, to be measured.

Principle of Operation
The System works by encoding each shaft to be measured with a magnetic signal. In most circumstances, the component to be measured can be encoded directly, and does not require any mechanical modification. Measurements can be made on a shaft or component of any material, either magnetic or non magnetic. In either case, a magnetic material is applied to the component to be measured. This material is then encoded with a magnetic signal. This signal is read via a hall effect sensor. The sensors (2 or more) are connected to a microprocessor signal processor, which calculates the speed and differential angular displacement of the shafts. The information is then output via either CAN of 0-5v analogue output.

Applications:

DriveShaft & Input Shaft Torque
By measuring the Output flange and hub at either end of a driveshaft, the transmitted torque can be calculated. Similarly, the gearbox input shaft can be measured, giving instantaneous engine power.

Relative motion of Crankshaft & Camshaft
The dynamics of the powertrain systems can me analysed dynamically on the circuit

Gearbox Stiffness & Integrity
Relative phasing of for example the Crownwheel and pinion can indicate gears running out of true due to gearbox housing flexing

Supply 10 - 15v DC
Resolution 0.0125 Deg 10bit
Rotational Speed 50 -30,000 RPM
Air Gap 0.2 - 2 mm
Accuracy >0.5%
Sampling Rate 100Hz - 5000Hz

Output
Angle CAN or 0-5v Analogue
Speed CAN or 0-5v Pulse

For further details and to purchase, please enquire via email or phone call. This item is for information only.

AT Power sells to Customers in all parts of the UK and other countries. For current delivery details see \\\\\\\'Shipping & Returns\\\\\\\' (bottom left box).

Equipmake ShaftSense